The operation method of the reaction kettle?

Reactor is a kind of reaction equipment, in the operation must pay attention to, otherwise it will be damaged for many reasons, resulting in production was forced to stop. The operation of the reaction kettle should pay attention to many aspects.

First of all, we must strictly in accordance with the rules and regulations to operate the reactor.

Secondly, before operation, carefully check whether there is any abnormality. During normal operation, do not open the upper cover and touch the connection terminals on the board to avoid electric shock. It is strictly prohibited to operate under pressure; During the pressure test with nitrogen, carefully observe the change of pressure gauge to reach the pressure test, and immediately close the nitrogen valve switch; The heating speed should not be too fast, and the pressurization should also be carried out slowly, especially the stirring speed is allowed to increase slowly.

Finally, when the kettle body is heated to a higher temperature, do not contact with the kettle body to avoid scalding; the temperature should be cooled first after the experiment. Do not cool quickly to prevent damage caused by excessive temperature difference and pressure. At the same time to timely unplug the power supply.

At the same time, the reactor should pay attention to maintenance after use, so that the autoclave can have a better service life.